Dimension12Dimension12
MIDI
ROUTING/INSTALLATION
27
The MIDI recieve channel is set to 10.
Program change commands are:
1. bank 1
2. bank 2
3. bank 3
4. bank 4
5. bank 1&2
Connect guitar out directly to the D12Os
6. bank 3&4
input, connect main output to the ampli-
fiers input. 7. stop
8. play
9. record
10. loop
11. gate/reverse
12. effect on/off
13. stutter
Connect guitar out directly to the
amplifier input, connect fx send toUsing an intelligent MIDI controller with the D12 is the key to
the D12Os input, and fx return tounlocking its incredible power. Basic MIDI controllers will work
the D12Os main output.
with the D12 as well. Simply connect the MIDI out of the controller
to the MIDI in of the D12. Make sure the Controller is set to trans-
mit on channel 10. Now you have access to all of the front panel
sample functions.
OPEN /
CLOSE
DIGITAL AUDIOCOMPACTSKIPPLAY / PAUSESKIPConnect fx send to D12Os input, and fx
SEARCHSTOPSEARCH
return to the D12Os output. This will allowWith an intelligent controller you can assign the controller to send
any signal connected to the mixer to bedifferent program change information on whichever switch you
sampled by the D12. Connect monitor to
desire. This allows you to group the functions in whatever order
seperate input for headphone monitoring.
you wish. Higher end guitar rack effects and some keyboards
allow for this function, thus making the D12 a great companion
piece to a rack setup.
RESET
To reset the D12 hold down both Play and Stop while powering up
the unit. This will reset the unit.
Connect microphone (with XLR-1/4�
cable) directly to D12. Connect D12 out-
put to P.A. input. |